APS30024IP
This product reached it's end of life on June 1, 2024 The APS-300-24 IP is a 300W /12.5A 24VDC damp location power supply. It features a 100-277VAC input, over-current and over-voltage protection. It has two parallel 24VDC outputs.
Cross-References
12 equivalents across 7 brands
Compare top 3 →- spec →
The Fail-Safe Changing Views is a new series of visual therapy luminaires by Eaton. Designed to bring warmth, ambience and positive energy into a variety of environments, these luminaires help create a calming influence throughout any facility. The CV Series is designed with an extremely thin profile, less than 1" deep, and it is ADA compliant. Choose from a variety of images in the picture gallery to create wall murals.
- category
- subcategory
- environment
- spec delta
- voltage: UNV → 277V/24DCV
- wattage: 100W → 300W
H277 transformer steps 277V line voltage down to 120V fixture operating voltage. 300VA max. For use with Non-IC housings.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V/120V → 277V/24DCV
- spec →
Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.
- category
- subcategory
- environment
- wattage
- spec delta
- voltage: 120V → 277V/24DCV
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 50W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x10 residential framing or commercial installation. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires two components; a P3MRREMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions. Requires a remote low voltage transformer supplied by others.
- category
- subcategory
- environment
- spec delta
- wattage: 71W → 300W
- spec →
Cooper Lighting's Modular Power Supply allows external fixture access for safe and easy installation and service. There is no need to remove lamps or reflectors to disconnect fixture power with the Modular Power Supply. Access to the individual fixture's power supply allows servicing without turning off all the fixtures disrupting occupants. Certain airborne contaminants can diminish the integrity of acrylic components. Refer to the Material Compatibility tables for additional information.
- category
- subcategory
- environment
HALO Stepdown Transformer, 277V to 120V, 300VA Max, for Non-IC H7 Housings
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 277V/120V → 277V/24DCV
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 50W maximum low voltage MR16 tungsten-halogen lamps and integrated LED lamps. Suitable for 2x10 residential framing or commercial installation. Integral toroidal wound magnetic step down transformer provides high efficiency and low noise. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires two components; a P3MR or P3MRREMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- subcategory
- environment
- spec delta
- voltage: 120V → 277V/24DCV
- wattage: 50W → 300W
- spec →
H1499TCP is a Non-IC housing designed for non-insulated Chicago Plenum rated ceilings. H1499TCP featuers an integral low voltage dual-tap 120V/277V transformer that supplies 12 volts to MR16 lamps. H1499TCP is for non-insulated ceilings. If installed in insulated ceilings, insulation must be kept 3 inches away from all sides of housing.
- category
- subcategory
- environment
- voltage
- spec delta
- voltage: 120V/277V → 277V/24DCV
- wattage: 50W → 300W
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 75W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installation. Die cast lamp capsule facilitates aim and focus, unique heat sink configuration lower critical lamp pinch extending life. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Insulation must be kept 3" away from top and sides of the housing. A complete fixture requires two components; a P3MR REMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions. Requires a remote low voltage transformer supplied by others.
- category
- subcategory
- environment
- spec delta
- wattage: 75W → 300W