Acclaim LightingControls

LINEARXTR

Linear XTR is a family of LED linear fixtures designed for maximum run length. Using custom internal circuitry and advanced power systems, it allows for interconnection of up to 700’ of product and up to 1400’ off of a single driver when controlled in group mode. Available in multiple color temperatures of white or col

family: Linear XTRcct: 2700dimming: 0-10Vip rating: IP66voltage: 277Vhousing material: aluminum

Cross-References

20 equivalents across 9 brands

Compare top 3
  • Juno® IC20LED 600LM, dedicated 5-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV

    • category
    • environment
    • CCT
    • dimming
    • housing
    • spec delta
    • voltage: UNV277V
    spec →
  • ParaflexPFX-3153partial

    The PFX-3153 Cylinder Light delivers modern style and efficient performance, featuring a sleek cylindrical design and customizable options for wattage, color temperature, light distribution, and direction. Its integrated photocell streamlines lighting control and maximizes energy savings. Suitable for entrances, walkways, stairwells, bridges, facades, conference rooms, and auditoriums, it offers balanced design and superior illumination.

    • category
    • environment
    • voltage
    • dimming
    • housing
    • spec delta
    • cct: 3000K2700K
    spec →
  • Fifth LightFifth Light BMS Pro 1partial

    The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 1 converts Cooper’s Greengate and WaveLinx Wired control system’s protocol to LON. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • The Remote Relay Unit (RRU) provides 120 or 277 VAC input voltage configurations. The RRU is designed to force all outputs in the lighting control panel to an emergency scene regardless of the control panel programmed output status. This allows the override of outputs to full bright during loss of normal (grid) power to allow an alternate power source to drive the lighting loads. Once the RRU senses the normal power returning, the control panel will return to the normal programmed operating mode.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • The ALP Premium LED Area Light delivers a versatile security lighting solution with many configuration possibilities by integrating three brightness settings and three or five selectable CCT color temperatures via a switch located on the fixture housing. The ALP Series delivers up to 9000 lumens maximum brightness of glare-free light, is constructed from corrosion-resistant die-cast metal housing, and will last more than 50,000 hours of maintenance-free use. The included replaceable 3-Pin NEMA photocell ensures light comes on at night and goes off during the day. Wall and Pole mounting hardware are included. The 60W LED area light replaces up to 250W metal halide and has a 5-year warranty.

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • cct: 3000400050006500K2700K
    spec →
  • InvueVWMpartial

    The classic lines and sophisticated construction of the Vision Wall luminaire make it an ideal complement to architectural site design. Offering LED technology across the site, flood and wall mounted fixtures the Vision series provides true family scaling in both physical form and lumen capability for architectural site lighting applications.

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • cct: 30004000K2700K
    spec →
  • WaveLinx PRO Integrated Components are available to allow luminaire manufacturers to incorporate WaveLinx Integrated Sensors into their lineup to support WaveLinx project sales. WaveLinx integrated sensor luminaires are an integral of the WaveLinx Wireless System providing motion detection, daylighting, and wireless radio with each having out of the box functionality.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • nLightNPP16-ERpartial

    Overview The nLight nPP16 ER Series relay pack is used to switch luminaires powered via an emergency circuit. Ideal for use along side a standard nPP16 relay pack that controls a zone's normal

    • category
    • environment
    • voltage
    • dimming
    spec →
  • iO Lighting008partial

    iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.

    • category
    • environment
    • voltage
    • CCT
    • dimming
    • spec delta
    • voltage: 120V/277V277V
    spec →
  • Juno® IC20RLED 600LM, dedicated 4-inch LED remodel housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV dimming or

    • category
    • environment
    • CCT
    • dimming
    • housing
    • spec delta
    • voltage: UNV277V
    spec →
  • ParaflexPFX-5126partial

    The revolutionary, sleek design of the PFX 5126 - LS is aesthetically pleasing to any space. It supports surface mounts. It features popular 4", 6" width and 2', 4' length. Most of our customers have been struggling with inventory control, thanks to the wattage selectable and CCT adjustable technology, you can now fulfill more orders with fewer SKUs to win more projects! It works with most applications which will be your go-to-choice for offices, schools, hospital, corridor light industrial spaces or anywhere stylish lines of light are desired.

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • cct: 3000K2700K
    spec →
  • Fifth LightFifth Light BMS Pro 2partial

    The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 2 converts Cooper’s Greengate, WaveLinx Wired and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • The OEF-P PIR Fixture Mount High Bay/Low Bay Dimming Occupancy Sensor with Integrated Photocell and Two Interchangeable Lenses provides 1-10V control. The OEF-P is easy to program and set for desired 1-100% continuous dimming levels during daylighting. It is also engineered to meet and exceed all standards requirements of ASHRAE Standard 90.1 2010. Provides robust mechanical latching relay. Relay always returns to close after power loss event. UL listed for electronic ballast loads 120/277V.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • Super configurable and easy to install Entry Wall Pack

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • cct: 300040005000K2700K
    spec →
  • WaveLinxBMS Pro 1partial

    The BMS Pro products are feature-rich, high performance protocol translators which allows data exchange between Cooper's (Greengate, WaveLinx Wired and Fifth Light) lighting control systems and the Building Automation Systems and other third party systems using standard based communication protocols. The BMS Pro 1 converts Cooper’s Greengate and iLumin control system’s protocol to LON. The BMS Pro 2 converts Cooper’s Greengate, iLumin and Fifth Light lighting control systems’ protocols to BACnet/IP, BACnet MS/TP, Modbus TCP/IP, Modbus RTU.

    • category
    • environment
    • voltage
    • dimming
    spec →
  • nLightNPP16-IMpartial

    The nLight nPP16 IM Series power pack adds power monitoring to the standard nLight nPP16 Series power / relay pack. Each unit has two basic responsibilities: providing system bus power and switching

    • category
    • environment
    • voltage
    • dimming
    spec →
  • Juno® IC22LED 600LM, dedicated 6-inch LED new construction housing with integral light engine and choice of dimmable drivers: 11.5W nominal dedicated 120 volt driver with forward phase and ELV

    • category
    • environment
    • CCT
    • dimming
    • housing
    • spec delta
    • voltage: UNV277V
    spec →
  • HALOMWP20FSUNVDBZpartial

    HALO LED Mini Wall Pack Bronze, Dusk to Dawn, 3CCT Selectable, 120-277V 2000-4000 lumen

    • category
    • environment
    • voltage
    • dimming
    • spec delta
    • cct: 300040005000K2700K
    spec →
  • WaveLinxWTKpartial

    Provides daylight dimming & control for connected luminaires without WaveLinx Lite integrated sensor

    • category
    • environment
    • voltage
    • dimming
    spec →
  • nLightNPS-80-EZpartial

    The nLight nPS 80 EZ dimming pack controls LED luminaires with 0-10V LED drivers from eldoLED. This smart device results in the luminaire being “nLight enabled” - making it both addressable as well

    • category
    • environment
    • voltage
    • dimming
    spec →