JE08
The JE08 is a small recessed extrusion, built using high quality anodized aluminum. This extrusion offers great heat dissipation qualities make it best suited for the low- medium output tape light range. The JE line is known for its size and versatility in applications, which can help facilitate the project specification process. More
Cross-References
21 equivalents across 9 brands
Compare top 3 →- spec →
A standard in the industry for both light commercial and residential LED applications, the remodel housing accepts a wide variety of trims allowing for a number of different lighting effects. The H750RICAT housing is for installations where the housing will be in direct contact with insulation and the AIR-TITE design meets restricted air flow requirements. The H750RICAT connector system provides high efficacy code compliance when used with HALO LED modules.
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- spec →
Experience the ultimate 5-in-1 solution with E Series Switchable White LED Trim Kits. Offering flexibility at your fingertips, E Series Trim Kits feature a switch, located directly on the fixture,
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
DL 4 SSE 4″ LED Square Down Light, DL 4 SSE is compatible with most 4″ standard recessed new construction and remodel housings.
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
The Westwood 913 and 913-2 are ultra-compact wall fixtures for use with line voltage PAR30 halogen lamps. Model 913 provides downlight or uplight by way of its 180° rotational fixture head. Model 913-2 provides combination uplight and downlight. Both models mount over a standard 4-inch J-box and connect directly to 120-volt line voltage. Various lenses, louvers, and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects.
- category
- subcategory
- environment
- voltage
- spec →
The WaveLinx Wired Recessed Combination Sensor (NS3-C-NA) can be connected directly to the iLumin Network via CAN terminals. It features three functions: PIR motion detection, daylight measurement and an infrared (IR) receiver. All three functions may be programmed within the iLumin software according to specific user needs. This sensor features a coverage of up to 27.8 ft (8.5m) diameter depending on installation height with PIR detection optimized for slight motion for superior performance. The PIR feature may be set in Manual or Automatic On with a custom time-out setting. The daylight feature is used to set light levels where daylighting is required. In Operational Mode the infrared receiver may select Scenes, turn lighting ON/OFF and adjust levels locally with the iLumin IR Handheld Remote (HH17IR). The NS3-C sensor’s combined features ensure maximum energy savings as well as great flexibility for the user.
- category
- subcategory
- environment
- voltage
- dimming
- spec delta
- voltage: 120-347V → 120V
- spec →
JRD56RD06LM35K90W4 This product webpage has been discontinued.
- category
- subcategory
- environment
- voltage
- housing
- spec delta
- cct: 3000K → 2700K
- spec →
HALO Commercial 4" LED Cylinder Downlight Series
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- voltage: 120V/277V/UNV → 120V
- spec →
The HALO Home 6" MicroEdge™ Smart Canless Direct Mount Downlight can be installed virtually anywhere with its slim compact design and smart HALO Home features. From dimming and adjustable color temperature to the endless ways to customize and control through the HALO Home app, it’s a brilliant addition to your smart home lighting system.
- category
- subcategory
- environment
- voltage
- CCT
- spec →
The H457ICAT1E is an insulated ceiling, AIR-TITE™ housing offering 120 volt dimming capability with many incandescent or electronic low voltage dimmers. Designed for use with EL4 series LED Gen2 Light Engines and TL4 LED Series Trims, the H457ICAT1E offers high quality downlighting along with high efficacy – the result being great lighting and significant energy savings.
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
The 4-inch and 6-inch Square Wafer™ Downlights feature a slim, canless design that installs directly into the ceiling eliminating the need for traditional recessed housings. They provide an
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
Luminoso 4 inch Rotatable LED Residential Downlight provides advanced dimming parameters with capabilities reaching to as low as 5% and works with most widely available traditional dimmers
- category
- subcategory
- environment
- voltage
- CCT
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- voltage
- CCT
- spec →
Directional LED recessed lighting fixtures for residential or commercial application types. The Lithonia Lighting 4", 5" and 6" adjustable LED gimbal fixtures are 80% more efficient than incandescent
- category
- subcategory
- environment
- voltage
- CCT
- spec →
HALO Commercial 4" LED Cylinder Downlight Series
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- voltage: 120V/277V/UNV → 120V
- spec →
The HALO Home 4" MicroEdge™ Smart Canless Direct Mount Downlights can be installed virtually anywhere with its slim compact design and smart HALO Home features. From dimming and adjustable color temperature to the endless ways to customize and control through the HALO Home app, it’s a brilliant addition to your smart home lighting system.
- category
- subcategory
- environment
- voltage
- CCT
- spec →
A standard in the industry for both light commercial and residential LED applications, the housing accepts a wide variety of trims allowing for a number of different lighting effects from one basic housing. The H750ICAT housing is for installations where the housing will be in direct contact with insulation and the AIR-TITE design meets restricted air flow requirements. The H750ICAT connector system provides high efficacy code compliance when used with HALO LED modules.
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
The Westwood 914 and 914-2 are ultra-compact wall fixtures for use with line voltage PAR38 halogen lamps. Model 914 uses one (1) 150-watt max lamp (not included) and provides downlight or uplight by way of its 180° rotational fixture head. Model 914-2 uses two (2) 150-watt max lamps (not included) and provides combination uplight and downlight. Both models mount over a standard 4-inch J-box and connect directly to 120-volt line voltage. Various lenses, louvers, and color or dichroic filters can be combined - up to three at once - to create multiple lighting effects.
- category
- subcategory
- environment
- voltage
- housing
- spec →
Great for finishing new construction or renovations where utilizing existing sockets is ideal, the LED recessed finishing kit includes a trim and Acculamp LED lamp to give you versatility, quality
- category
- subcategory
- environment
- voltage
- CCT
- spec →
HALO Commercial LED Retrofit Downlight 6-5/8" to 7" nominal apertures
- category
- subcategory
- environment
- voltage
- CCT
- dimming
- +1 more
- voltage: 120V/277V/UNV → 120V