LF01
The LF01 is a flangeless mud-over extrusion with regressed lens, helping to not only reduce glare and surface brightness but also creating beautiful and unobtrusive light lines, integrating seamlessly into many architectural applications. More
Cross-References
14 equivalents across 6 brands
Compare top 3 →- spec →
The Define Patient from NeoRay brings a hospitality feel to the hospital space. Utilizing a theatrical lighting approach, the Define Patient encompasses a symmetric design providing superb illumination in critical areas while reducing shadows during examination.
- category
- environment
- voltage
- CCT
- dimming
- spec →
WF4C, WF6C This product webpage has been discontinued.
- category
- environment
- voltage
- CCT
- spec →
The Input/Output Device (OCC-RJ45) provides connection of any Greengate low voltage occupancy sensor, or other low voltage maintain closure, to the Room Controller or DLVP power module to define the occupancy state of the space. The OCC-RJ45 also can be used as an output to the HVAC system, third party systems or Switchpacks based upon room occupancy status.
- category
- environment
- voltage
- dimming
- spec →
The Emergency Lighting Micro/Mini Inverters are a perfect fit in a distributed emergency lighting systems where emergency LED drivers cannot be used, such as with Type B TLEDs, integral-base lamps, or luminaires with drivers integral to the LED array (e.g. flat panels or UFO high-bays). Remote mounting up to 250 feet.
- category
- environment
- voltage
- dimming
- spec →
Provides a minimum of 90 minutes of illumination for the rated wattage upon loss of AC power. Ideal for applications that require attractive unit equipment or when wall mounting is undesirable.
- category
- environment
- voltage
- spec →
The 4-inch and 6-inch Semi-Regressed Wafer™ Downlights feature a slim, canless design that installs directly into the ceiling eliminating the need for traditional recessed housings. Both the fixture
- category
- environment
- voltage
- CCT
- spec →
Emergency Lighting AutoDim Micro Mini Inverters
- category
- environment
- voltage
- dimming
- spec →
The 2-inch, 4-inch, and 6-inch, Deep Regressed Wafer™ Downlights feature a slim, canless design that installs directly into the ceiling eliminating the need for traditional recessed housings. Our
- category
- environment
- CCT
- dimming
- spec delta
- voltage: UNV → 120V
- spec →
The Sure-Lites INVM Series are a single phase, compact design mini inverter systems that provide 175VA to 1100VA emergency power to LED, fluourescent, incandescent and HID lighting loads. PWM/MOSFET technology provides pure sine wave emergency power (clean power) within 8ms to 24ms of transfer time. Field selectable 120/120 or 277/277VAC input/output allow easier installation. The INVM series are UL 924-listed and provide 90 minutes of emergency power for egress lighting. Small cabinet footprints and multiple mounting means including grid ceiling, recessed wall or standard wall mounted for the 175VA units and floor or wall mounting for the 350VA through 1100VA units allow flexibility for building space limitations.
- category
- environment
- voltage
- dimming
- spec delta
- voltage: 277V/120V → 120V