4-E-SERIES-LED-MODULE
4BEMW, 4BEMW, 4SEMW This product webpage has been discontinued.
Cross-References
30 equivalents across 15 brands
Compare top 3 →- spec →
The Halo RL56 Wireless is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights. When paired with a ZigBee based system, the RL56 Wireless can perform dimming, white tuning, scheduling, grouping, geo-fencing, automations, and remote access all through a mobile device. The RL56 Wireless is cULus Listed for use with Halo, and is UL Classified for use with compatible 5” and 6” housings. The RL56 Wireless lens provides uniform illumination and wet location listing. Precision construction makes any housing AIR-TITE for added savings and code compliance.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 27005000K → 5000K
- spec →
With this Smart Bulb, anyone can begin to enjoy the benefits of smart lighting with HALO Home. That’s because it can be used with fixtures that accept a standard E26 lamp base. Instantly transforming vanities, table/floor lamps, porch lights and more. Unlike competitors’ products, it’s Bluetooth-enabled and ready to connect out-of-the-box with all of the features of the HALO Home smart lighting system. With no internet service, bridge, or hub required, it’s the easiest smart lighting product out there. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights constant power enabling them to strengthen and extend your HALO Home mesh network by repeating system commands and respond to commands from any Controller, including smartphones. Single - HHA19089BLE40A; 2-Pack - HHA19089BLE40A-2PK; 4-Pack - HHA19089BLE40A-4PK; 6-Pack - HHA19089BLE40A-6PK; (Do not use in combination with non-HALO Home dimmers or install in recessed housings or enclosed fixtures)
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 27005000K → 5000K
- spec →
Luminoso 4 inch Rotatable LED Residential Downlight provides advanced dimming parameters with capabilities reaching to as low as 5% and works with most widely available traditional dimmers
- category
- subcategory
- environment
- voltage
- lumens
- wattage
- +1 more
- cct: 2700K → 5000K
- spec →
The Lumark AP Wall Cylinder is a high-performance, energy-efficient wall sconce designed for both indoor and outdoor applications. Featuring customizable CCT and wattage selectability, it provides superior light distribution and durability. Its robust construction ensures long-lasting performance, making it an ideal, low-maintenance solution for any lighting project.
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120-347V → 120V
- lumens: 3635 → 656
- wattage: 70W → 9.8W
- spec →
The Zuma 1211 is a rugged, ADA compliant recessed mounted step light for use with compact fluorescent lamp sources. Its housing is constructed from corrosion-proof, injection-molded polycarbonate. Louvered or open face plates are available in injection-molded polycarbonate or die-cast aluminum. All models can be mounted in non-combustible surfaces such as brick, concrete or stone.
- category
- subcategory
- environment
- voltage
- wattage
- spec →
Introducing the Anto+ Series, a versatile LED Ceiling System that can be integrated into the Pure 3 and P.Forty profiles to create infinite systems. With its stand alone surface mounted, recessed trim or trimless version, it offers flexibility and style to suit any interior design. The Anto+ Series is available in a variety of metallic colors for the iconic lens tube, as well as the mask, and countless color combinations for the housing and cable, allowing you to create an individual masterpiece. Upgrade your space with the Anto+ Series and experience the beauty of LED lighting.
- category
- subcategory
- environment
- voltage
- CRI
- spec delta
- lumens: 656 → 3688
- cct: 5000K → 6500K
- wattage: 9.8W → 47W
- spec →
The (DSF) Square Flat Ultra-Slim Canless Downlight brings you modern & unique lighting solution. Canless Ultra-Slim design reduce the required of clearance for the installation.
- category
- subcategory
- environment
- voltage
- CRI
- spec delta
- lumens: 656 → 1500
- cct: 5000K → 2700K
- wattage: 9.8W → 18W
- spec →
Paraflex’s PFX-5307 would greatly create possibilities in the whole commercial area which make light modular with multiple sizes, beam options , and high visual comfort COB LED as its standard configuration. It is now available in pendant and surface mount configurations which offers a beautiful and slender solution. Modular design COB LED chip: 80+ standard, 90+ optional Dimming: 0-10V(10% standard ,1% optional) or TRIAC Beam angle: 15°, 24°, 36°, 60° options Architectural form : 4", 6" and 8" Mounting: Surface or pendant Wattage Selectable
- category
- subcategory
- environment
- lumens
- CRI
- spec delta
- voltage: UNV → 120V
- cct: 2700K → 5000K
- spec →
3" aperture specification grade open downlight reflector. Suitable for use with 75W maximum low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. The 50° cutoff to lamp and lamp image provides a smooth, glare free distribution of light. Distribution based on lamp beam angle utilized. Use for task and general area illumination.
- category
- subcategory
- environment
- voltage
- CRI
- spec delta
- wattage: 75W → 9.8W
- spec →
A line voltage fixture perfect for Cove Lighting or Task Lighting areas where space, budget and energy are a factor. Boca’s CleanDim® technology ensures even dimming from 0-100%.
- category
- environment
- voltage
- CRI
- wattage
- spec delta
- cct: 2200K → 5000K
- spec →
Carpet pathway multi-colored step and isle low voltage LED lighting systems. Made from durable and flexible vinyl.
- category
- environment
- voltage
- CCT
- spec delta
- wattage: 9.8W → 600W
- spec →
Origin by Atlas Lighting is our new economy line of LED lighting products that is designed to provide a lower-cost entry point to LED lighting. These durable temporary work lights feature retractable handles and a female power receptacle for daisy-chaining multiple lights.
- category
- environment
- voltage
- CCT
- spec delta
- lumens: 7200 → 656
- wattage: 60W → 9.8W
- spec →
4" & 6" slim LED trims match the look of HALO HLB slim canless downlights.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 2700K → 5000K
- spec →
The HALO Home Smart Recessed Downlight is a LED Baffle-Trim Module for 5" and 6" recessed housings. Control these lights with all of the features of HALO Home has to offer: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, and Schedules. Install the free app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights with constant power allowing them to strengthen and extend your HALO Home mesh network by responding to and repeating wireless messages from any Controller, smartphone or voice assistant like Amazon Alexa or Hey, Google. White: RL56069BLE40AWH
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 27005000K → 5000K
- spec →
The Luminoso DLE-4 is compatible with most 4″ standard recessed new construction and remodel housings
- category
- subcategory
- environment
- voltage
- lumens
- wattage
- +1 more
- cct: 3000K → 5000K
- spec →
CYL Wall Cylinder
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120-347V → 120V
- lumens: 3635 → 656
- wattage: 70W → 9.8W
- spec →
The Zuma 1211 is a rugged, ADA compliant recessed mounted step light for use with compact fluorescent lamp sources. Its housing is constructed from corrosion-proof, injection-molded polycarbonate. Louvered or open face plates are available in injection-molded polycarbonate or die-cast aluminum. All models can be mounted in non-combustible surfaces such as brick, concrete, or stone.
- category
- subcategory
- environment
- voltage
- wattage
- spec →
Boca Lighting and Controls's NanoX is an ultra-sleek, exterior-rated line-voltage luminaire designed for façade accents, under-eave and canopy applications where space is tight and energy efficiency is critical.
- category
- environment
- voltage
- CRI
- wattage
- spec delta
- subcategory: canopy → downlight
- cct: 2200K → 5000K
- spec →
The HALO Home 4" MicroEdge™ Smart Canless Direct Mount Downlights can be installed virtually anywhere with its slim compact design and smart HALO Home features. From dimming and adjustable color temperature to the endless ways to customize and control through the HALO Home app, it’s a brilliant addition to your smart home lighting system.
- category
- subcategory
- environment
- voltage
- lumens
- CRI
- +2 more
- cct: 2700K → 5000K
- spec →
DL 4 SSE 4″ LED Square Down Light, DL 4 SSE is compatible with most 4″ standard recessed new construction and remodel housings.
- category
- subcategory
- environment
- voltage
- lumens
- wattage
- +1 more
- cct: 2700K → 5000K
- spec →
CYL Wall Cylinder
- category
- subcategory
- environment
- voltage
- CCT
- spec delta
- voltage: 120-347V → 120V
- lumens: 3635 → 656
- wattage: 70W → 9.8W
- spec →
The Zuma 1211 is a rugged, ADA compliant recessed mounted step light for use with compact fluorescent lamp sources. Its housing is constructed from corrosion-proof, injection-molded polycarbonate. Louvered or open face plates are available in injection-molded polycarbonate or die-cast aluminum. All models can be mounted in non-combustible surfaces such as brick, concrete or stone.
- category
- subcategory
- environment
- voltage
- wattage
- spec →
WSQ - Decorative Wall Sconce
- category
- environment
- lumens
- CCT
- CRI
- spec delta
- voltage: 120V → 277V