CLEAR-RIBBED-HALOGEN-TRACK
LTHCLRB, LTKCLRB This product webpage has been discontinued.
Cross-References
18 equivalents across 9 brands
Compare top 3 →- spec →
Apex in Static White is a 120V, driverless light bar fixture designed for large-scale applications. Quick-ship and easy to install, it delivers continuous static white illumination with long-run capability, making it a reliable choice for seamless accent or task lighting.
- category
- subcategory
- environment
- voltage
- spec →
The Lazer Two-Conductor track is available in two finishes and 4 lengths. The overall height is only 9/16"; and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the Track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
- category
- subcategory
- environment
- voltage
- spec →
A 3" aperture specification grade super adjustable for low voltage MR16 tungsten-halogen lamps. Adjustment mechanism features 15° to 75° hot aiming capabilities and locks from below the ceiling at any aiming angle. Clean shape minimizes appearance below the ceiling. Optical design reduces aperture brightness and stray light on the ceiling. Use for accent and task lighting on slope ceilings up to 12/12 pitch to illuminate vertical surfaces parallel to slope.
- category
- subcategory
- environment
- voltage
- spec →
Sanibel 301 is a small, line voltage dimmable LED and halogen MR16 luminaire with integral 12V step-down transformer. It features a fully adjustable side swivel stem and built-in adjustable shroud to control glare. Side swivel provides 340° tilt and 360° rotation. Various lenses, louvers and color or dichroic filters can be combined – up to three at once – to create multiple lighting effects.
- category
- subcategory
- environment
- voltage
TEK Track 2 Circuit2 Neutral 120V
- category
- subcategory
- environment
- voltage
- spec →
The YT08 is a pocket extrusion that is made from high quality anodized aluminum. The pocket extrusion allows for a hidden light source with a smooth angle in the extrusion to enhance floors, walkways, and stairs with lighting accentuation. This is achieved by mounting the extrusion 12”-18” above stairways and walkways when More
- category
- subcategory
- environment
- voltage
120V Live End Feed. Product Type : Track Connector
- category
- subcategory
- environment
- voltage
- spec →
A 2-1/4" square aperture specification grade lens adjustable pinhole for 75W maximum low voltage MR16 or AR70 tungsten-halogen or 20W MR16 ceramic metal halide lamps. Provides up to 45° of lamp tilt depending on distribution. Distribution based on lamp beam angle. Use for task, accent or general area illumination. Wet location listed and suitable for use above food preparation areas.
- category
- subcategory
- environment
- voltage
- spec →
The AA07 was created with bathrooms and kitchen areas in mind; this under tile extrusion is constructed from high quality anodized aluminum and is used to create lineation between tiles or to beautifully end a line of tiles. This creates a sublime accent for counters and vanities alike and it can be More
- category
- subcategory
- environment
- voltage
Essence Track: ArchitecturalTrack Head SERIES: ESS-302 OPTICS: 15°, 25°, 38° LUMENS: 1100 lm CCT: 30K
- category
- subcategory
- environment
- voltage
- spec →
The H99RTAT is a small aperture Non-IC AIR-TITE™ housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE™ but insulation must be kept 3 inches away from all sides of housing. For installation from below the ceiling.
- category
- subcategory
- environment
- voltage
- spec →
3" aperture specification grade open angle cut reflector. Suitable for use with 75W maximum PAR16, PAR20 and and low voltage tungsten-halogen or LED MR16 lamps, use also with integral LED light engine and reflectors. Provides for up to 20° of lamp tilt, use to limit direct view into housing. Distribution based on lamp beam angle. Use for accent lighting or general area illumination on slope ceilings up to 4/12 pitch.
- category
- subcategory
- environment
- voltage
120V Live End Feed, Reverse Polarity. Product Type : Track Connector
- category
- subcategory
- environment
- voltage