OMS-3000
OMS This product webpage has been discontinued.
Cross-References
25 equivalents across 11 brands
Compare top 3 →- spec →
Round LED low profile surface mount fixture
- category
- environment
- voltage
- spec delta
- wattage: 11W → 500W
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 9 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- spec delta
- wattage: 70W → 500W
- spec →
The WaveLinx PRO Area Controller with IP66-Outdoor Rated Enclosure (WAC2-POE-OUT-EN) is the main component of the WaveLinx Pro wireless connected lighting (WCL) system. WaveLinx Pro eliminates the cost and complexity of typical wireless control system commissioning while providing a flexible and reconfigurable topology for on the fly space adjustments. The WaveLinx Pro system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings. The WAC coordinates between the WaveLinx Pro smart and connected Mobile App and various WaveLinx Pro devices to create communications and a building ecosystem that provides out-of-the-box functionality and leverages Cooper Lighting Solutions patent pending automatic code commissioning features. Using standard-based wireless mesh compliant topology the WAC communicates to various WaveLinx Pro standard-based devices to provide area, lighting zone configuration, monitoring, and control. The WAC provides centralized coordination of multiple areas for partial ON/partial OFF scheduling, demand response (Trellix application required), lighting, occupancy and daylight settings and scene control. A single WAC can be connected to the building Local Area Network (LAN) to coordinate 49 user-defined and one construction area, or multiple WAC’s can exist on a building LAN to scale the system to hundreds of areas all accessible for setup, configuration and control through the WaveLinx Pro Mobile App.
- category
- environment
- voltage
- spec delta
- wattage: 40W → 500W
- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- spec delta
- wattage: 18W → 500W
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec →
The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.
- category
- environment
- voltage
- wattage
- spec →
The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.
- category
- environment
- voltage
- spec →
Transformers reduce line voltage to 12 volts for use with Lumiere low-voltage fixtures. Transformers are available in four basic types: hard wire installation, cord and plug, in-ground, and solid state.
- category
- environment
- voltage
- spec →
Transformer 150 The heart of a low-voltage outdoor lighting system is the transformer. Our rugged professional-grade multi-tap transformer sets the standard for ease of installation and adaptability to standard and app-based controls. Key Features Fully-potted, insulated, single-core transformer Easy on/off, secondary breaker switches on each common tap Two common lug terminals Amp loop to check the primary amperage on the transformer Accepts plug-in-timers, has direct photocell connection Angled terminal strip for easy wire connections, eliminates blind spots Heavy-duty stainless-steel cabinet with integrated mounting bar, lockable Removable bottom panel, 5 knockouts for wire connections Integrated short circuit and overload protection Includes 5’ grounded heavy-gauge power cord ETL tested, in conformance to ANSI/UL 1838 Electrical Specifications 150 watts with 4 taps: 12, 13, 14, 15 volts, Maximum total amps: 1.5A. Use any combination of terminal lugs but do not exceed transformer’s rated wattage on any lug.
- category
- environment
- voltage
120VAC swivel SPST conduit mounting with 6" wire length. Includes o-ring and lock nut. A photo cell-only configuration will turn on lighting whenever it sufficiently dark to trigger the photo cell, even during the middle of the day if there is a thunderstorm. A lighting system controlled by a photo cell will remain on until dawn, so lights will be on through the entire night.
- category
- environment
- voltage
- spec →
Round LED low profile surface mount fixture
- category
- environment
- voltage
- spec delta
- wattage: 11W → 500W
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 11 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- spec delta
- wattage: 70W → 500W
- spec →
The WaveLinx Outdoor Area Controller is an IP66-rated outdoor lighting controller that manages communication between WaveLinx PRO enabled luminaires. The outdoor controller is suitable for parking garages and parking lot applications. The WaveLinx PRO system meets modern code and utility requirements, delivers energy and cost savings, while enabling buildings to become smart buildings. The controller coordinates between the WaveLinx PRO smart and connected Mobile App and various WaveLinx PRO devices to create communications and a building ecosystem.
- category
- environment
- voltage
- spec delta
- wattage: 30W → 500W
- spec →
The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.
- category
- environment
- voltage
- spec delta
- wattage: 3W → 500W
- spec →
Transformer 300 The heart of a low-voltage outdoor lighting system is the transformer. Our rugged professional-grade multi-tap transformer sets the standard for ease of installation and adaptability to standard and app-based controls. Key Features Fully-potted, insulated, single-core transformer Easy on/off, secondary breaker switches on each common tap Two common lug terminals Amp loop to check the primary amperage on the transformer Accepts plug-in-timers, has direct photocell connection Angled terminal strip for easy wire connections, eliminates blind spots Heavy-duty stainless-steel cabinet with integrated mounting bar, lockable Removable bottom panel, 5 knockouts for wire connections Integrated short circuit and overload protection Includes 5’ grounded heavy-gauge power cord ETL tested, in conformance to ANSI/UL 1838 Electrical Specifications 300 watts with 4 taps: 12, 13, 14, 15 volts, Maximum total amps: 3A. Use any combination of terminal lugs but do not exceed transformer’s rated wattage on any lug.
- category
- environment
- voltage
- spec →
Round LED low profile surface mount fixture
- category
- environment
- voltage
- spec delta
- wattage: 11W → 500W
- spec →
Greengate PD216 allows dimming control of 2 or 3-wire loads via 0-10V control signals
- category
- environment
- voltage
- spec delta
- wattage: 3W → 500W
- spec →
Transformer 600 The heart of a low-voltage outdoor lighting system is the transformer. Our rugged professional-grade multi-tap transformer sets the standard for ease of installation and adaptability to standard and app-based controls. Key Features Fully-potted, insulated, single-core transformer Easy on/off, secondary breaker switches on each common tap Two common lug terminals Amp loop to check the primary amperage on the transformer Accepts plug-in-timers, has direct photocell connection Angled terminal strip for easy wire connections, eliminates blind spots Heavy-duty stainless-steel cabinet with integrated mounting bar, lockable Removable bottom panel, 5 knockouts for wire connections Integrated short circuit and overload protection Includes 5’ grounded heavy-gauge power cord ETL tested, in conformance to ANSI/UL 1838 Electrical Specifications 600 watts with 6 taps: 12, 13, 14, 15, 16, 17, 18 volts, Maximum total amps: 6A. Use any combination of terminal lugs but do not exceed transformer’s rated wattage on any lug.
- category
- environment
- voltage