HVRSERIES
HVR in Static White combines high-voltage efficiency with driverless simplicity, making it perfect for large-scale applications requiring consistent, uninterrupted light.
Cross-References
21 equivalents across 10 brands
Compare top 3 →- spec →
HLCE MS Surface Mount LED Disk Lights with Motion Sensor
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- wattage: 14.6W → 6W
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 9 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- CRI
- spec delta
- cct: 5000K → 2700K
- wattage: 70W → 6W
- spec →
iO LED Lighting’s raye is designed for cove and wall slot applications. Two cross sectional profiles are available: 3"h x 3.6"w and 2"h x 6"w. raye is ideal for applications where spatial conditions are limited but functional light is required. This low voltage LED based luminaire offers three luminous intensities for a variety of architectural lighting requirements. raye’s optical assembly has been designed to uniformly illuminate the interior surfaces of the cove for a clean appearance, while offering a very precise asymmetric beam projection. raye is perfect for delivering light at low angles for hallow cove and wall slot conditions. Individual units may be placed end to end without socket shadows, offering a uniform distribution of light along an architectural reveal. Projected average rated life is 50,000 hours at 70% of lamp lumen output. raye is available with three lumen outputs for white light.
- category
- environment
- voltage
- CCT
- spec delta
- voltage: 120V/277V → 120V
- wattage: 12.1W → 6W
- spec →
The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.
- category
- environment
- voltage
- CRI
- spec delta
- cct: 27003000350040007000K → 2700K
- wattage: 440W → 6W
- spec →
The WaveLinx Wired Wallbox ArchiDMX Controller (ADMX) is a completely self contained device that can control virtually any standard DMX device such as RGB fixtures, moving lights, dimmers, and effects. The ArchiDMX has preset, scene, and show playback features as well as wireless networking and IR remote control options. ArchiDMX can be programmed by either the ArchiDMX Studio Software or IR Remote. Utilizing the 2.4GHz wireless option further expedites commissioning as well as allows for linking of multiple stations. Suitable for standard single and multi-gang NEMA wall box with decorator style wallplate.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120-347V → 120V
- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- spec delta
- cct: 3000K → 2700K
- wattage: 18W → 6W
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec delta
- wattage: 300W → 6W
- spec →
The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.
- category
- environment
- voltage
- spec delta
- wattage: 600W → 6W
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 75W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installation. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. Die cast lamp capsule facilitates aim and focus, unique heat sink configuration lower critical lamp pinch extending life. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Insulation must be kept 3" away from top and sides of the housing. A complete fixture requires two components; a P3MR housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- environment
- voltage
- spec delta
- wattage: 71W → 6W
- spec →
HLCE MS Surface Mount LED Disk Lights with Motion Sensor
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- wattage: 12.1W → 6W
- spec →
QuickLink delivers the fastest downlighting installation HALO has to offer. Installers can power up to 11 QuickLink lights on the single remote power supply, making it easy and efficient to install energy-saving smart lighting. Each fixture attaches to the low voltage cable in seconds with QuickLink Twist Connectors. Start with a QuickLink Kit which includes the remote power supply, 35-feet of Low-V cable, and 4 canless downlights. Then mix and match individual fixtures to complete the project.
- category
- environment
- voltage
- CRI
- spec delta
- cct: 5000K → 2700K
- wattage: 70W → 6W
- spec →
The popular NanoLume can be specified with Boca Lighting and Controls’s Dim to Warm technology, Nano Warm Dim.
- category
- environment
- voltage
- CRI
- spec delta
- cct: 2200K → 2700K
- spec →
The Forward Power Dimmers are system accessories for Cooper lighting control systems. It allows dimming control of 2 or 3-wire loads via 0-10V control signals. Each module includes a backbox, heatsink, temperature sensor to monitor operating temperature.
- category
- environment
- voltage
- spec delta
- wattage: 3W → 6W
- spec →
HLCE MS Surface Mount LED Disk Lights with Motion Sensor
- category
- environment
- voltage
- CCT
- CRI
- spec delta
- wattage: 14.6W → 6W
- spec →
The HALO Home Smart Plug-In Lamp Dimmer enables convenient control for standard floor/table lamps along with other dimmable plug-in lighting. Wirelessly control fixtures connected to the Plug-In Lamp Dimmer using HALO Home Controllers or App. Combine with HALO Home light fixtures and other Add-on Devices to create Groups and Scenes to conveniently set lighting where you want it. White: HWP1BLE40AWH
- category
- environment
- voltage
- spec delta
- wattage: 300W → 6W
- spec →
Greengate PD216 allows dimming control of 2 or 3-wire loads via 0-10V control signals
- category
- environment
- voltage
- spec delta
- wattage: 3W → 6W