NES-7-FAMILY
OVERVIEW The nES 7 is a small passive infrared occupancy sensor designed to be easily embedded into luminaires. This sensor provides excellent line of sight 360~176; PIR detection of small motion and
Cross-References
21 equivalents across 8 brands
Compare top 3 →- spec →
The MicroSet Passive Infrared Low Voltage Occupancy Sensing Ceiling Sensor is a motion sensing lighting control that is used for energy savings and convenience. The sensor is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. These sensors have multi-segmented lenses. For units to sense motion, the person must cross between two segments. PIR sensors are considered line-of sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The sensor includes self-adaptive technology that continuously self-adjusts sensitivity and Time Delay in real-time, maximizing the potential energy savings that are available in the particular application.
- voltage
- spec delta
- spec →
• Made of rugged aluminum alloy with a glass lens • Projects light in both directions, illuminating the wall above and below • Durable and suitable for wet locations • Features a matte black finish and modern design • Includes a pre-installed dusk-to-dawn light photocell sensor for energy-saving operation by turning off lights during daytime • Operating Temperature : -4 deg.F to +104 deg.F / -20 deg.C to +40 deg.C
- category
- environment
- voltage
- spec delta
- wattage: 18W → 9.2W
- spec →
TCS WiFi Smart Transformer: 150W/300W, stainless steel, smart app-controlled, 3 zones with dimming/scheduling, continuous power Smart Zone, 10-year warranty.
- category
- environment
- voltage
- spec delta
- wattage: 300W → 9.2W
- spec →
The UC1 provides effective LED task lighting in a variety of environments. Constructed with minimal 3/4" depth and durable IK10 rated housing and lens. 24", 36", 48" lengths for use in confined spaces. UC1 comes with selectable CCT and dim to warm ELV/Triac (120V only) making it an excellent choice for a plethora of applications.
- category
- environment
- voltage
- spec delta
- wattage: 440W → 9.2W
- spec →
The H38LVICAT is an IC AIR-TITE™ fixture for use with H3 3” series trims. Housing is AIR-TITE™ rated to prevent airflow between heated or air conditioned spaces and unconditioned attic/plenum areas. For use with 12V MR16 lamps. H38LVICAT is IC rated and may be used in insulated ceilings and be covered with insulation.
- category
- environment
- voltage
- spec delta
- wattage: 50W → 9.2W
- spec →
The Smart Wireless Dimming Kit makes HALO Home more accessible than ever with 2 smart A19 lamps and the touch-sensitive battery-powered Anyplace Dimmer. It is the perfect pairing for customers just getting started with HALO Home or a user finishing out a room. The only thing needed is the free HALO Home app and setup is simple with no hub or bridge required. Anyplace Dimmer + 2 Smart Bulbs: HHA19HWAS1BLE-2PK
- category
- environment
- voltage
- spec →
The WaveLinx Touchscreen Wall Controller (TSE57) provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 5.7” (14.5cm) touchscreen features a low-profile design with edge to edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.
- category
- environment
- voltage
- wattage
- spec →
Greengate sensor detects motion from heat-emitting source and automatically switch lights ON
- voltage
- spec delta
- spec →
An H1499ICAT family housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H1499ICAT is for installations where the housing will be in direct contact with insulation. The H1499ICAT AIR-TITE™ housing also meets restricted air flow requirements.
- category
- environment
- voltage
- spec delta
- wattage: 50W → 9.2W
- spec →
The HALO Home Smart Plug-In Lamp Dimmer enables convenient control for standard floor/table lamps along with other dimmable plug-in lighting. Wirelessly control fixtures connected to the Plug-In Lamp Dimmer using HALO Home Controllers or App. Combine with HALO Home light fixtures and other Add-on Devices to create Groups and Scenes to conveniently set lighting where you want it. White: HWP1BLE40AWH
- category
- environment
- voltage
- spec delta
- wattage: 300W → 9.2W
- spec →
The WaveLinx Touchscreen Wall Controller (TSC-E-7) provides an elegant and discreet light control for any WaveLinx controlled space. The portrait-oriented 7” [17.8cm] touchscreen features a low-profile design with edge-to-edge glass and an extremely responsive display making it a great architectural addition to conference rooms, executive offices and open spaces.
- category
- environment
- voltage
- wattage
- spec →
Greengate sensor detects motion from heat-emitting source and automatically switch lights ON
- voltage
- spec delta
- spec →
The H36LVICAT is a shallow IC AIR-TITE™ fixture for use with H3 3” series trims. Housing is AIR-TITE rated to prevent airflow between heated or air conditioned spaces and unconditioned attic/plenum areas. For use with 12V MR16 lamps. H36LVICAT is IC rated and may be used in insulated ceilings and be covered with insulation.
- category
- environment
- voltage
- spec delta
- wattage: 50W → 9.2W
- spec →
The HALO Home In-Wall Accessory Dimmer wirelessly controls HALO Home lighting Devices or Groups. The Accessory Dimmer is designed to connect to the HALO Home Bluetooth Mesh network with no hub or internet connection required. As a wireless remote control with hardwired power, this Controller can be programmed to command Smart Lights or configured to work with the HALO Home In-wall Smart Dimmer to operate as a wireless 3-way or multi-switch. ***White: HIWAC1BLE40AWH | ***Black: HIWAC1BLE40ABL
- category
- environment
- voltage
- spec delta
- wattage: 600W → 9.2W