PS50X-POWER-SUPPLY
The PS50X Power Supply is a Class 2 low voltage power supply intended to power an Acuity Relay Panel, or other 24VDC Acuity Controls devices. The PS50X is intended for use with 120-277V, 50/60Hz
Cross-References
8 equivalents across 5 brands
Compare top 3 →- spec →
H1499TCP is a Non-IC housing designed for non-insulated Chicago Plenum rated ceilings. H1499TCP featuers an integral low voltage dual-tap 120V/277V transformer that supplies 12 volts to MR16 lamps. H1499TCP is for non-insulated ceilings. If installed in insulated ceilings, insulation must be kept 3 inches away from all sides of housing.
- category
- environment
- voltage
- wattage
- spec delta
- subcategory: power → emergency_relay
- voltage: 120V/277V → 120V/277V/24DCV
- spec →
A 3" aperture specification grade adjustable housing platform that accepts 50W maximum low voltage MR16 tungsten-halogen lamps and integrated LED lamps. Suitable for 2x10 residential framing or commercial installation. Integral toroidal wound magnetic step down transformer provides high efficiency and low noise. The platform is airtight to prevent energy loss, room drafts, dust marks on ceilings and reduce sound transmission. Units may be used in direct contact with insulation and building products. A complete fixture requires two components; a P3MR or P3MRREMOTE housing platform and a 3" IRiS optical element. Elements may be changed after installation to provide a variety of distributions.
- category
- environment
- voltage
- wattage
- spec delta
- subcategory: power → emergency_relay
- voltage: 120V → 120V/277V/24DCV
- spec →
FM series is a versatile LED ceiling or wall mount series which can be used in a broad range of residential and commercial applications. This series provides customers with a high quality luminaire utilizing the latest LED, solid state lighting and electronic driver technology for optimal performance and maximized energy efficiency. With a traditional opal white lens, the FM series produces even, uniform light distribution and ideal choice for offices, corridors, stairways, bedroom, closet and foyers applications where customers are replacing incandescent, circline or compact fluorescent lamps.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → 120V/277V/24DCV
Remote LED driver for use with BEGA 24V LED luminaires. LED driver rated 50W. Dimming not available
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 24DCV → 120V/277V/24DCV
- spec →
RF Receiver – Dimming 1-10V /driver 50W, Input 230V, Output 24V More
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V/277V/24DCV → 24DCV
- spec →
The H38LVICAT is an IC AIR-TITE™ fixture for use with H3 3” series trims. Housing is AIR-TITE™ rated to prevent airflow between heated or air conditioned spaces and unconditioned attic/plenum areas. For use with 12V MR16 lamps. H38LVICAT is IC rated and may be used in insulated ceilings and be covered with insulation.
- category
- environment
- voltage
- wattage
- spec delta
- subcategory: power → emergency_relay
- voltage: 120V → 120V/277V/24DCV
- spec →
A 3" aperture specification grade adjustable housing platform designed for below the ceiling installations. Accepts 50W maximum low voltage MR16 tungsten-halogen lamps. Suitable for 2x6 residential framing or shallow commercial installations. Insulation must be kept 3" away from top and sides of the housing. Integral Truvolt™ toroidal wound magnetic step down transformer with dual outputs compensates for dimmer losses providing full light output and is extremely low noise. The fixture is ideal when remodeling older construction. A complete installation requires two components; the RPN3MR remodel platform and a 3" IRiS element. Elements may be changed after installation to provide a variety of distributions. Elements are visually identical and match when new fixtures and remodel fixtures are installed in the same job site. Not suitable for use with the E3SA or the self flanged option.
- category
- environment
- voltage
- wattage
- spec delta
- voltage: 120V → 120V/277V/24DCV
- spec →
An H1499ICAT family housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H1499ICAT is for installations where the housing will be in direct contact with insulation. The H1499ICAT AIR-TITE™ housing also meets restricted air flow requirements.
- category
- environment
- voltage
- wattage
- spec delta
- subcategory: power → emergency_relay
- voltage: 120V → 120V/277V/24DCV