4RLS-DOWNLIGHT
4RLS This product webpage has been discontinued.
Cross-References
19 equivalents across 9 brands
Compare top 3 →- spec →
A standard in the industry for both light commercial and residential LED applications, the remodel housing accepts a wide variety of trims allowing for a number of different lighting effects. The H750RICAT housing is for installations where the housing will be in direct contact with insulation and the AIR-TITE design meets restricted air flow requirements. The H750RICAT connector system provides high efficacy code compliance when used with HALO LED modules.
- category
- subcategory
- environment
- voltage
- CCT
- CRI
- +1 more
- spec →
The JE08 is a small recessed extrusion, built using high quality anodized aluminum. This extrusion offers great heat dissipation qualities make it best suited for the low- medium output tape light range. The JE line is known for its size and versatility in applications, which can help facilitate the project specification process. More
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
DL 4 SSE 4″ LED Square Down Light, DL 4 SSE is compatible with most 4″ standard recessed new construction and remodel housings.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- spec →
The HALO Home 6" MicroEdge™ Smart Canless Direct Mount Downlight can be installed virtually anywhere with its slim compact design and smart HALO Home features. From dimming and adjustable color temperature to the endless ways to customize and control through the HALO Home app, it’s a brilliant addition to your smart home lighting system.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- spec →
HALO Commercial 4" LED Cylinder Downlight Series
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +2 more
- voltage: 120V/277V/UNV → 120V
- spec →
The Boca 631 is a tiny dual-lens in-ground fixture, 3 inches in diameter, for use with a low-voltage MR16 lamp. The non-adjustable beam provides a crisp, white halogen light source for grazing or uplighting in constricted areas. The dual lens design greatly reduces the top glass temperature and allows for installation in pedestrian areas. Designed for recess mounting in concrete, brick, stone or dirt, it is suitable for drive-over applications.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- spec →
The LITELUME™ LL-IFG6 Brings precision and versatility to your lighting project. This recessed, canless gimbal module combines a clean, modern look with powerful adjustability, 355° rotation and 90° tilt for perfect aiming every time. 5 CCT Field-selectable color temperatures 2700K–5000K ensures the right light for any application, from cozy residential spaces to demanding commercial environments. Long lasting efficiency, flexibility, and style without the need for a housing or junction box.
- category
- subcategory
- environment
- voltage
- CCT
- spec →
The Halo H550RICAT is a dedicated 5-inch aperture LED new construction IC, AIR-TITE housing for use with Halo RL56 and RL7 LED retrofit modules, and ML56 LED Downlighting System of LED Light Modules and LED Trims. H550RICAT is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE, certified ASTM-E283 housing designed to prevent air flow between occupied spaces and unconditioned areas. The LED connection is non-screw base to preserve the high efficacy rating of the luminaire as used with the compatible Halo or All-Pro LED modules, lighting engines and trims.
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
The AG01 is a recessed flangeless extrusion that is constructed using anodized aluminum and it is designed to be used for wall and ceiling, with easy installation. This extrusion can have diffusors up to 19’ 6” length, creating a seamless look for longer runs. More
- category
- subcategory
- environment
- voltage
- CCT
- spec →
Luminoso 4 inch Rotatable LED Residential Downlight provides advanced dimming parameters with capabilities reaching to as low as 5% and works with most widely available traditional dimmers
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- spec →
The HALO Home 4" MicroEdge™ Smart Canless Direct Mount Downlights can be installed virtually anywhere with its slim compact design and smart HALO Home features. From dimming and adjustable color temperature to the endless ways to customize and control through the HALO Home app, it’s a brilliant addition to your smart home lighting system.
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +1 more
- spec →
HALO Commercial 4" LED Cylinder Downlight Series
- category
- subcategory
- environment
- mounting
- voltage
- CCT
- +2 more
- voltage: 120V/277V/UNV → 120V
- spec →
The LITELUME™ LL-IFG4 Brings precision and versatility to your lighting project. This recessed, canless gimbal module combines a clean, modern look with powerful adjustability, 355° rotation and 90° tilt for perfect aiming every time. 5 CCT Field-selectable color temperatures 2700K–5000K ensures the right light for any application, from cozy residential spaces to demanding commercial environments. Long lasting efficiency, flexibility, and style without the need for a housing or junction box.
- category
- subcategory
- environment
- voltage
- CCT
- spec →
The Halo H550ICAT is a dedicated 5-inch aperture LED new construction IC, AIR-TITE housing for use with Halo RL56 and RL7 LED retrofit modules, and ML56 LED Downlighting System of LED Light Modules and LED Trims. H550ICAT is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE, certified ASTM-E283 housing designed to prevent air flow between occupied spaces and unconditioned areas. The LED connection is non-screw base to preserve the high efficacy rating of the luminaire as used with the compatible Halo or All-Pro LED modules, lighting engines and trims.
- category
- subcategory
- environment
- voltage
- CCT
- housing
- spec →
The JD01 is a flangeless, mud-over recessed extrusion from high quality anodized aluminum. It has a reputation for ease of installation, measuring below 5/8” in depth and is therefore shallow enough to fit under standard dry wall, eliminating the need to notch out studs or create special stud structures. The installation only More
- category
- subcategory
- environment
- voltage
- CCT
- spec →
The LITELUME™ LL-IFG2 Brings precision and versatility to your lighting project. This recessed, canless gimbal module combines a clean, modern look with powerful adjustability, 355° rotation and 90° tilt for perfect aiming every time. 5 CCT Field-selectable color temperatures 2700K–5000K ensures the right light for any application, from cozy residential spaces to demanding commercial environments. Long lasting efficiency, flexibility, and style without the need for a housing or junction box.
- category
- subcategory
- environment
- voltage
- CCT