Cross-Reference
Find the equal.
41,605 products · 1,561 cross-references · 219 brands · 23,034 spec sheets.
397 products
Filtered by spec — refine in the sidebar, or open one for its cross-references. Showing the first 60; add filters to narrow.
- Alset LED1'x4' LED Trofferspec →
indoor · office general · recessed
Featuring a frosted lens to reduce glare, the ALSET® Frosted Troffer LED is both convenient and versatile. The UL and DLC certified fixture is both dimmable and instant on. It's perfect for warehouses, offices, hospitals and much more.
- Alset LED2’,4’, and 8’ Strip with Lensspec →
indoor · emergency egress
This flexible fixture can be used in numerous applications as the lumens and options allow it to be used as a replacement for industrial strips, vanity lighting, stairwells, retail and hallway applications. Options include occupancy sensors, tandem wiring to permit continuous rows, emergency lighting, and CCT Selectable.
- Alset LED2'x2' LED Trofferspec →
indoor · office general · recessed
Featuring a frosted lens to reduce glare, the ALSET® Frosted Troffer LED is both convenient and versatile. The UL and DLC certified fixture is both dimmable and instant on. It's perfect for warehouses, offices, hospitals and much more.
- Alset LED24" LED Light Tubespec →
indoor/outdoor
Featuring a translucent polycarbonate lens, the ALSET® 24" LED T8 Direct Wire Tube is both energy efficient and affordable. The ETL and DLC certified fixture is instant on and features ANSI surge protection. It's perfect for any location where fluorescent tubes are being replaced.
- Alset LED48" LED Light Tubespec →
indoor/outdoor
Featuring a translucent polycarbonate lens, the ALSET® 48" Linear Direct Wire LED Tube is both energy efficient and affordable. The ETL and DLC certified fixture is instant on and features ANSI surge protection. It's perfect for any location where fluorescent tubes are being replaced.
- Alset LED6" Downlight Retrofitspec →
indoor · downlight general · recessed
Featuring a frosted lens to reduce glare, the ALSET® Recessed Downlight Retrofit LED is both convenient and versatile. The UL and Energy Star certified fixture is both dimmable and instant on. It's suitable for bathrooms, kitchens, basements and more.
- Alset LED8"-10' Downlight Retrofitspec →
indoor · downlight general · recessed
Alset® LED 8”- 10” flexible downlight can replace existing open downlights measuring 8” to 10” with an adjustable ring. Perfect for retrofitting into drywall ceiling. No bar hangers required. Non IC rated. Suitable for wet locations and through wiring. With (3) different lumen packages, can be used in ceilings from 15’-30’ and higher. Comparable light output to 70W CFL, up to 100 W Metal Halides and 250-500W T4 lighting. Typical applications include atriums, church ceilings, retail stores, colleges and airports.
- Alset LEDArchitectural Trofferspec →
indoor · office general · recessed
Available with Frosted diffuser. Instant on to full brightness. Suitable for damp locations. Lower maintenance costs.
indoor · office general · recessed
Low cost LED troffer retrofit kit
- Alset LEDDark Sky Wallpackspec →
outdoor · parking area · pole
Dark sky compliant. Instant on to full brightness. Can be converted into pole mount
indoor/outdoor · parking area
Direct replacement for HID fixture. Easy to install. Flexible mounting bracket.
- Alset LEDFLAT PANELspec →
indoor · office general
Installation methods: Recessed, Suspended, Surface-mounted
- Alset LEDFlood Lightsspec →
indoor/outdoor · landscape path
Designed for outdoor applications, these fixtures are made of die cast aluminum housing and can be configured to a variety of lighting solutions including landscape, façade, structure, accent and general illumination. The modular design of these floods allows for flexibility in lighting applications.
- Alset LEDFrosted Lens Canopyspec →
outdoor · canopy gas station
Featuring a frosted lens to reduce glare, the ALSET® Frosted Canopy LED is both convenient and versatile. The UL and DLC certified fixture is instant on and features a wide light distribution. It's suitable for use inside and outside and is perfect for warehouses, gas stations, storage areas and much more.
- Alset LEDFrosted Lens Highbayspec →
indoor · high bay aisle
Featuring a frosted lens to reduce glare, the ALSET® Highbay LED is both convenient and versatile. The UL and DLC certified fixture is instant on and features a wide light distribution. It's suitable for use inside and outside and is perfect for warehouses, gymnasiums, swimming pools, and much more
- Alset LEDFull Cutoff Wallpackspec →
outdoor · wall pack exterior · wall
No light above 90°
- Alset LEDGS Recessed Canopyspec →
indoor/outdoor · canopy gas station · surface
Featuring a frosted lens to reduce glare, the ALSET® Semi-recessed Canopy LED is both convenient and versatile. Designed to fit into a 16” x 16” or 20” x 20” opening, this semi recessed fixture is identical to the surface mount, but engineered to have the driver board located behind the face of the canopy to create a sleek aesthetic appearance. This fixture is supplied with a water tight seal on drivers and connections. The fixture measures 18.17” x 18.17” x 3.70” deep to cover numerous existing fixture replacements up to 320 watt HID.
- Alset LEDLED FL Highbay-Lspec →
indoor · high bay aisle
Featuring a frosted lens to reduce glare, the ALSET® LED Highbay is both convenient and versatile. The UL and DLC certified fixture is instant on and features a wide light distribution. It's suitable for use inside and outside and is perfect for warehouses, gymnasiums, swimming pools, and much more
- Alset LEDLED Frosted Lens 2'x4' Trofferspec →
indoor · office general · recessed
Featuring a frosted lens to reduce glare, the ALSET®Frosted Troffer LED is both convenient and versatile. The UL and DLC certified fixture is both dimmable and instant on. It's perfect for warehouses, offices, hospitals and much more.
- Alset LEDLED Frosted Lens Lowbayspec →
indoor/outdoor · canopy gas station
Featuring a frosted lens to reduce glare, the ALSET®LED lowbay provides comfortable, high efficiency illumination for retail stores, parking garages, stairwells and lower ceiling applications where its slim profile is ideal. Two lumen packages are available (8,000 and 11,000). IP65 rated for damp location.
outdoor
Alset® LED has designed fixtures for installations where moisture, dirt, dust, corrosion and vibration may be present. They may be used in locations made hazardous due to the presence of flammable or explosive gases, vapors and combustible dusts, or high ambient temperatures as defined by the NEC. Applications include classified areas such as paint manufacturing plants, ammunition facilities, oil and gas producing and refining plants, off-shore and dockside installations, tank farms, pipeline pumping stations, marine loading and fuel transfer terminals.
indoor/outdoor
Designed to fit into decorative exterior fixtures, these easily install into existing mogul based HID sockets for significantly improved lighting and life, as well as significant energy savings.
- Alset LEDLED Parking Lot Lightingspec →
outdoor · parking area · pole
Alset® LED Parking Lot lighting are available in multiple distribution patterns and can replace HID lighting up to 1000W MH or HPS. The square housing mimics shoebox designs. Dark Bronze color is standard. Wet location Listed. Easy mounting for a variety of pole applications is done with the use of 1 of (5) different mounting brackets available. Typical applications include roadway, parking, area and perimeter lighting.
- Alset LEDLED Steel Frame troffersspec →
indoor · recessed
The LED Steel Frame troffer are available in 2 x 2 and 2 x 4 size with a full face LED lumen package. Available in 3000K, 4000K and 5000K colors, all models are dimmable and compatible with most lighting controls systems. Chicago plenum and New York Plenum ratings available.
- Alset LEDLED Street Lightspec →
outdoor · parking area · pole
ALSET® LED Streetlights are available in multiple distribution patterns and can replace HID lighting up to 1000W. Luminaires are suitable for wet locations and feature a locking bracket for easy access to internal components. The self-cleaning construction means the face of the bezel remains clean after rain or snow. Units come complete with a 2 3/8” slipfitter for easy installation. Typical applications include roadway, parking, area and perimeter lighting.
- Alset LEDLED Tunnel Fixturespec →
outdoor
The Alset® tunnel LED fixture features rugged, low profile construction with superior optical control. Designed to deliver uniform and energy efficient illumination to improve visibility in tunnel and underpass applications with reduced glare. UL listed for wet locations. IP66 and 3G vibration rated. Available in three different lumen packages (12,000 lumens, 15,000 and 24,000 lumens).
- Alset LEDLED Wall Packsspec →
indoor/outdoor · wall
Alset® LED wallpacks can replace HID lighting up to 400W MH or HPS for safety, security and general illumination. With both forward throw and downlight they provide excellent illumination and uniformity. Photocell option available. Uses include office buildings, shopping centers, restaurants, schools, warehouses, parking garages and other commercial applications.
- Alset LEDMini Wallpackspec →
outdoor · wall pack exterior · wall
Suitable for mounting 10' to 12'. No uplight. Multiple mounting options
- Alset LEDParking Lot Dark Skyspec →
outdoor · parking area · pole
Dark Sky Compliant. Instant on to full brightness, No flickering, No humming
indoor/outdoor
The VSW-P-0801-120 Passive Infrared Single or Multi-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional Wall Switch all-in-one that is used to for energy savings and convenience. The VSW-P-0801-120 is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field-of-view and automatically switch lights ON. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. The lights are turned ON by pressing the Pushbutton. The sensor provides true multi-way ON/OFF control. When lights have been activated, the lights will remain on as long as on the sensor(s) continue to detect motion. The occupant may manually turn OFF the lighting by pressing the ON/OFF button on any of the connected devices. If the room becomes vacant and the lights are ON, the lights will turn OFF when the unit that detected motion last times-out. Works with incandescent, LED, fluorescent, CFL, MLV, ELV or 1/6 HP motor load.
- Greengate37 Pin Receptaclespec →
indoor/outdoor
The 37 pin receptacle kit is used with the Greengate Patient Control Station to provide an interface to the Greengate Lighting control panel, Nurse Call System and the entertainment System. The 37 Pin receptacle kit includes: Three pigtails, Stainless steel wall plate, Receptacle/dummy plug, Class 2 low voltage wiring.
- GreengateCEPC - Emergency Power Controlspec →
indoor/outdoor · emergency egress
Listed for emergency lighting control applications, the RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that emergency fixtures illuminate at full brightness during utility power interruptions. Its small size makes it ideal for junction box or integrated fixture mounting in wireless or other modern control systems. An integral test switch allows for quick testing and verification.
indoor/outdoor · emergency egress
Greengate allows control of emergency lighting by any Greengate lighting control panel or OCC sensor
indoor/outdoor · emergency egress
Greengate allows control of emergency lighting by any Greengate lighting control panel or OCC sensor
- GreengateCEPC-2-D-CULspec →
indoor/outdoor · emergency egress
Greengate allows control of emergency lighting by any Greengate lighting control panel or OCC sensor
- GreengateCK4A - Control Keeperspec →
indoor/outdoor
The ControlKeeper 4A network lighting control panel is a cost effective specification grade lighting control system packed with plenty of standard features. Control up to 4 relays per panel with optional support for up to 4 0-10V dimming ballast control outputs. Network up to 254 ControlKeeper panels for a state-of-the-art lighting control system. Electrically held normally open, mechanically latched and two pole relays available. RS-232 port and RS-485 network standard.
indoor/outdoor
ControlKeeper M network lighting control panels are scalable to any size application. The large view color touchscreen permits entire network programming and monitoring for complete system control and integration. Control up to 48 relays per panel with discrete inputs for occupancy sensors, low voltage switches and other input devices. ControlKeeper M network panels are designed for intuitive programming, and monitoring of the relays. The relays automatically sense the optimal time to switch lighting loads.
indoor/outdoor
ControlKeeper M with Breakers network lighting control panels are scalable to any size application. The large view color touchscreen permits entire network programming and monitoring for complete system control and integration. Control up to 48 relays per panel with integral circuit breakers, as well as discrete inputs for occupancy sensors, low voltage switches and other input devices. ControlKeeper M with Breakers network panels are designed for intuitive programming, and monitoring of the relays. The relays automatically sense the optimal time to switch lighting loads.
indoor/outdoor
The ControlKeeper TouchScreen network lighting controlpanel is a cost effective specification grade lighting control system. Control up to 48 relays per panel. Network up to 254 ControlKeeper panels for a state of the art lighting control system. 16, 32, or 48 relay models available.
- GreengateControl Keeper 2 - CK2spec →
indoor/outdoor
The ControlKeeper 2 network lighting control panel is a cost effective specification grade lighting control system. Control 2 relays per panel. Network up to 254 ControlKeeper® panels for a state of the art lighting control system.
- GreengateControlKeeper 4 - CK4spec →
indoor/outdoor
The ControlKeeper 4 network lighting control panel is a cost effective specification grade lighting control system. Control 4 relays per panel. Network up to 254 ControlKeeper panels for a state of the art lighting control system.
indoor/outdoor
The Analog Photosensor is a system accessory for Greengate lighting control systems. It allows control of lighting levels based on how much natural light is present. Photosensors use a lens to gather light energy and provide an electrical signal to a controller device that is proportional to the measured light level. The sensor sensitivity is fixed, and based upon the sensor range selected. Available in indoor, outdoor, atrium, and skylight configurations.
- GreengateDLC-PD-DIMspec →
indoor/outdoor
Greengate Analog Photosensor allows control of lighting levels based on natural light levels
indoor/outdoor
Instead of pulling line-voltage to low-voltage transformers installed every few feet, bring line voltage to the DLVP power module and pull pre-terminated, low-voltage cable to every fixture, sensor, control, and receptacle control in a space. Available in 2 power levels (300 and 600W), UL924 listed, and pre-assembled, DLVP delivers out-of-the-box, “plug and play” code compliance.
- GreengateDLVP Personal Remotespec →
indoor/outdoor
The Distributed Low-Voltage Power System personal remote is a handheld IR device used to customize the intensity of LED lighting control zones to achieve a desired lighting scene. The personal remote can also be used to save a created lighting scene to a scene wall station and a scene button on the personal remote for easy recall. The personal remote communicates with the system through an IR interface which is part of an open-loop daylight sensor or closed-loop fixture integrated sensor.
- GreengateDLVP Programming Remotespec →
indoor/outdoor
The Distributed Low-Voltage Power System programming remote is a handheld IR device used to configure the DLVP system. The DLVP programming remote is a handheld tool that provides the user the ability to individually toggle zones, set sensor hold times and sensitivity, set daylight gains by zone, set sensor range, and assign fixtures with integrated sensors to control zones.
indoor/outdoor
The DSRC-FMOIR is an open loop daylight sensor that measures the natural light contribution in order to automatically adjust the lighting zones. It is part of the Room Controller and DLVP system and provides three easily distinguished light levels, Low (3-300 lux), High (30-3000 lux), and Direct Sun (300-30000 lux). The high light sensor range is selected by default, although this can be adjusted using the IR handheld programmer.
- GreengateDSRC-FMOIRspec →
indoor/outdoor · parking area
Greengate DSRC-FMOIR measures natural light contribution to automatically adjust lighting zones
indoor/outdoor
The Dual Technology Dual Relay Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The VNW-D-1001-DMV combines Ultrasonic (US) and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings. The unit contains two relays that allow the control of two separate loads. It does not require a neutral wire for installation making it ideal for retrofit applications.
indoor/outdoor
The Dual Technology Single Level Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. It does not require a neutral wire for installation making it ideal for retrofit applications. The VNW-D-1001-MV combines Ultrasonic (US) and Passive Infrared (PIR) sensor technologies to monitor a room for occupancy to deliver maximum energy savings and ensure the greatest sensitivity and coverage for tough applications without the threat of false triggers.
indoor/outdoor
The Ethernet Interface Module (EIM) provides secure serial-to-ethernet data transmission to enable data exchange between Keeper Enterprise, Greengate programming software application, and the Greengate panels. The device supports the SSL and SSH protocols, which work by encrypting data before sending it over the ethernet network.
indoor/outdoor
The EISSBox™ is a Virtual End Node (VEN) device installed at the customer site and receives secure OpenADR 2.0 web services from the Utility and provides a signal to the lighting control system.
indoor/outdoor · emergency egress
Cooper Lighting Solution's RRU-X-UNV includes a 20A rated high voltage Form C (N/O+N/C) relay and a low voltage Form A (N/O) relay and is UL924 Listed for emergency lighting control applications.The RRU-X-UNV can simultaneously bypass both a line voltage switch and a 0-10V dimming signal, ensuring that an emergency fixture illuminates at full brightness during a utility power interruption. Its small size makes it ideal for junction box mounting or integrated fixture mounting in wireless or other modern lighting control systems. An integral test switch and LED allow for quick testing and verification of proper function.
indoor/outdoor
Greengate External Power Supply powers user interfaces and other accessories
indoor/outdoor
The External Power Supply is a system accessory for the Greengate Lighting Control System. It is used to power user interfaces and other accessories when additional power is needed.
indoor/outdoor
The Greengate Digital Switch is available for the ControlKeeper and LiteKeeper 32, LiteKeeper 16 and LiteKeeper 8 lighting control panels. It is a decorator style switch with up to six buttons offers On/Off control of any relay or group of relays in the lighting control network.The Digital Switch permits multiple control stations to be connected to the lighting control panels and provides override and status feedback. Advanced system features such as masking and priorities can be applied to these switches to make your application both contractor and user friendly.
- GreengateGGRC-COUPLERspec →
indoor/outdoor
Greengate Pre-terminated Control Cablele simplifies connecting Room Controller or DLVP and devices
- GreengateGGRC-SPLITTERspec →
indoor/outdoor
Greengate Pre-terminated Control Cablele simplifies connecting Room Controller or DLVP and devices
indoor/outdoor
Pre-terminated Control Cable, couplers and splitters connect the Room Controller or DLVP power module and devices simplifying the Click & Go connection enabling automatic functionality upon power up. Cables are pre-terminated with industry standard RJ45 connectors.
- GreengateGGRJ45-03-Gspec →
indoor/outdoor
Greengate Pre-terminated Control Cablele simplifies connecting Room Controller or DLVP and devices